[config_bsp]
deploy_dir_image = .
image_link_name = kria-image-full-cmdline-k26-smk
image_name = kria-image-full-cmdline-k26-smk-20240522005805
kernel_imagetype = Image
machine = k26-smk
qb_cmdline_ip_slirp = ip=dhcp
qb_cmdline_ip_tap = ip=192.168.7.@CLIENT@::192.168.7.@GATEWAY@:255.255.255.0::eth0:off:8.8.8.8
qb_default_fstype = wic.qemu-sd
qb_default_kernel = none
qb_drive_type = /dev/sd
qb_dtb = devicetree/SMK-*.dtb
qb_graphics = 
qb_kernel_cmdline_append =  
qb_machine = -machine arm-generic-fdt
qb_machine_xilinx = -machine arm-generic-fdt
qb_mem = -m 4096
qb_network_device = -net nic -net nic -net nic -net nic,netdev=net0,macaddr=@MAC@
qb_opt_append =     -nodefaults     -global xlnx,zynqmp-boot.cpu-num=0 -global xlnx,zynqmp-boot.use-pmufw=true     -device loader,file=/scratch/binary-distro-build/05201002/build/tmp/deploy/images/k26-smk/arm-trusted-firmware.elf,cpu-num=0     -device loader,file=/scratch/binary-distro-build/05201002/build/tmp/deploy/images/k26-smk/u-boot.elf     -device loader,file=/scratch/binary-distro-build/05201002/build/tmp/deploy/images/k26-smk/fit-dtb.blob,addr=0x100000,force-raw=on      -device loader,file=/scratch/binary-distro-build/05201002/build/tmp/deploy/images/k26-smk/Image,addr=0x200000,force-raw=on -device loader,file=/scratch/binary-distro-build/05201002/build/tmp/deploy/images/k26-smk/boot.scr,addr=0x20000000,force-raw=on     -blockdev filename=/scratch/binary-distro-build/05201002/build/tmp/deploy/images/k26-smk/som-eeprom.bin,node-name=i2c1.eeprom-50,driver=file     -blockdev node-name=pmu-cfg,filename=/scratch/binary-distro-build/05201002/build/tmp/deploy/images/k26-smk/pmu-conf.bin,driver=file     -global xlnx,zynqmp-boot.drive=pmu-cfg     -pmu-args '     -M microblaze-fdt     -display none     -hw-dtb /scratch/binary-distro-build/05201002/build/tmp/deploy/images/k26-smk/qemu-hw-devicetrees/multiarch/zynqmp-pmu.dtb     -kernel /scratch/binary-distro-build/05201002/build/tmp/deploy/images/k26-smk/pmu-rom.elf     -device loader,file=/scratch/binary-distro-build/05201002/build/tmp/deploy/images/k26-smk/pmu-firmware-k26-smk.elf     -device loader,addr=0xfd1a0074,data=0x1011003,data-len=4     -device loader,addr=0xfd1a007C,data=0x1010f03,data-len=4     '   -serial null     -hw-dtb /scratch/binary-distro-build/05201002/build/tmp/deploy/images/k26-smk/qemu-hw-devicetrees/multiarch/board-zynqmp-k26-starterkit-virt.dtb     -blockdev filename=/scratch/binary-distro-build/05201002/build/tmp/deploy/images/k26-smk/kv-eeprom.bin,node-name=i2c1.eeprom-51,driver=file 
qb_pmu_opt =      -M microblaze-fdt     -display none     -hw-dtb /scratch/binary-distro-build/05201002/build/tmp/deploy/images/k26-smk/qemu-hw-devicetrees/multiarch/zynqmp-pmu.dtb     -kernel /scratch/binary-distro-build/05201002/build/tmp/deploy/images/k26-smk/pmu-rom.elf     -device loader,file=/scratch/binary-distro-build/05201002/build/tmp/deploy/images/k26-smk/pmu-firmware-k26-smk.elf     -device loader,addr=0xfd1a0074,data=0x1011003,data-len=4     -device loader,addr=0xfd1a007C,data=0x1010f03,data-len=4     
qb_rng = 
qb_rootfs = 
qb_rootfs_extra_opt = 
qb_rootfs_opt = -drive file=@ROOTFS@,if=sd,format=raw,index=1
qb_serial_opt = -serial mon:stdio -serial null
qb_smp = 
qb_system_name = qemu-system-aarch64-multiarch
serial_consoles = 115200;ttyPS1
staging_bindir_native = ../../../work/x86_64-linux/qemu-helper-native/1.0-r1/recipe-sysroot-native/usr/bin
staging_dir_host = ../../../work/k26_smk-xilinx-linux/kria-image-full-cmdline/1.0-r0/recipe-sysroot
staging_dir_native = ../../../work/k26_smk-xilinx-linux/kria-image-full-cmdline/1.0-r0/recipe-sysroot-native
tune_arch = aarch64
uninative_loader = ../../../sysroots-uninative/x86_64-linux/lib/ld-linux-x86-64.so.2